Mad Drop DERMAX Leather Cleaner

1. Remove loose dust and dirt from the surface.
2. Spray a small amount of Mad Drop DERMAX onto a microfiber cloth, applicator or suitable leather cleaning brush.
3. Spread the product evenly across the surface to be cleaned.
4. For more intensive cleaning, gently agitate the surface with a suitable leather brush.
5. Remove lifted dirt and product residue with a clean microfiber cloth.
6. If the surface is still dirty, repeat the process.

For best results, clean leather surfaces in small sections.

This makes it easier to control the amount of product used and the cleaning result.

Avoid using too much product – the leather surface does not need to be heavily saturated.

Start with a small amount and apply more if necessary. For heavier dirt, use a soft brush designed for leather.

Clean gently without applying excessive pressure. After cleaning, always remove loosened dirt and any remaining product with a clean microfiber cloth.

Avoid working on hot surfaces or in direct sunlight. Before using the product on unfamiliar, older or more sensitive leather, test it first on an inconspicuous area. The final result may vary depending on the type of leather, its condition and the level of dirt.

Keep out of reach of children. Avoid contact with eyes. If the product gets into the eyes, rinse carefully with water. Wash hands after use. Use in a well-ventilated area. Do not use on hot surfaces. Do not use the product for purposes other than its intended use. Read the information on the product label before use.