Foam & Pre-Wash Starter Kit

1. Pre-wash the vehicle. Dilute Mad Drop Pre Wash Concentrate according to the recommended ratio and apply it evenly to the exterior. Allow it to work on the dirt, but do not let it dry on the surface.
2. Rinse thoroughly. Use a pressure washer or strong stream of water to remove the loosened dirt before touching the paint.
3. Prepare the contact wash. Dilute Mad Drop Snowfoam Shampoo Concentrate in a wash bucket or foam gun according to the recommended ratio.
4. Wash with the Pure Wash Mitt. Work from the upper, cleaner areas of the vehicle down towards the dirtier lower sections. Use straight, gentle movements and rinse the mitt regularly.
5. Rinse the vehicle completely. Remove all remaining shampoo before applying protection.
6. Apply Magic Wet Coat. While the vehicle is still wet, spray a light and even amount onto one panel at a time.
7. Rinse immediately. Thoroughly rinse each treated area to activate and spread the protection. Do not allow the product to dry on the surface.
8. Dry the vehicle. Place the Blacktrap Drying Towel flat against the surface and gently drag or pat it across the paintwork to absorb the remaining water.

Always use Pre Wash before the contact wash. Removing as much dirt as possible before touching the paint helps reduce the risk of creating wash marks and fine scratches.

Snowfoam Shampoo Concentrate is a contact-wash shampoo, not a replacement for the pre-wash stage. Its high lubrication helps the wash mitt move smoothly across the surface during hand washing.

For best results, use separate wash tools for very dirty lower sections and regularly rinse the Pure Wash Mitt while washing.

Magic Wet Coat should only be applied to a freshly washed, wet surface. Work panel by panel and rinse immediately after application. A small amount is enough to achieve an even hydrophobic effect.

The system is suitable for most exterior vehicle surfaces, including paintwork, glass, exterior plastics and wheels. The Blacktrap towel can be used across painted surfaces, glass and exterior trim.

Do not allow Pre Wash, shampoo or Magic Wet Coat to dry on the surface. Avoid washing or applying products to hot panels or in direct sunlight.

Keep all chemical products tightly closed and store them in a cool, dry place away from direct sunlight, heat and freezing temperatures. Keep out of reach of children and avoid contact with eyes and skin.

After use, rinse the Pure Wash Microfibre Mitt thoroughly to remove trapped dirt and allow it to dry completely before storage.

Wash the Blacktrap Drying Towel and wash mitt separately from regular laundry using a suitable microfibre detergent or mild liquid detergent. Do not use fabric softener or bleach, as these can damage the fibres and reduce absorption and cleaning performance.